Product Description

AUDI SEAT VW Belt Tensioner Idler Pulley OE 571145278E , E

OE number :
OE: E
OE:
OE: A
OE:1 051 901
OE:89056018

OEM No. Ref.
E, , A, 1 051 901, 89056018,, A,1 051 901,89056018 , 1.06, 1372703, RKT1573, 5711-04-05423P, 14.06,1372703,RKT1573,5711-04-05423P,140097,POA1491,0066423,PBT8582,461.85.00,SK571283,S097Z

Fitment For:
A6 (4A, C4)    1994/06-1997/10
A6 Avant (4A, C4)    1994/06-1997/12
80 (8C, B4)    1991/09-1994/12
80 Avant (8C, B4)    1991/09-1996/01
CABRIOLET (8G7, B4)    1991/05-2000/08
CADDY II Box (9K9A)    1995/11-2004/01
GOLF III (1H1)    1991/08-1998/07
GOLF III Cabriolet (1E7)    1993/07-1998/05
TRANSPORTER IV Platform/Chassis (70XD)    1990/07-2003/04
TRANSPORTER IV Bus (70XB, 70XC, 7DB, 7DW)    1990/09-2003/04
TRANSPORTER IV Box (70XA)    1990/07-2003/04
VOYAGE    1994-2002
GOLF IV (1J1)    1997/08-2005/06
GALAXY (WGR)    1995/03-2006/05
CORDOBA Hatchback    1995/11-1999/06
CORDOBA (6K2/C2)    1993/02-1999/10
CORDOBA Vario (6K5)    1999/06-2002/12
TOLEDO I (1L)    1991/01-1999/10
IBIZA II (6K1)    1993/03-1999/08
ALHAMBRA (7V8, 7V9)    1996/04-2571/03
CORDOBA Vario (6K5)    1996/08-1999/06
INCA (6K9)    1995/11-2003/06

Car Fitment Model Year Engine
VW GOLF III (1H1) 1991-1998 1.8
1.9 TD,GTD
1.9 TDI
2
GOLF III Cabriolet (1E7) 1993-1998 2
GOLF IV Cabriolet (1E7) 1998-2002 2
PASSAT (3A2, 35I), GOLF III Cabriolet (1E7), TRANSPORTER IV Box (70XA), GOLF III (1H1), PASSAT Variant (3A5, 35I), TRANSPORTER IV Bus (70XB, 70XC, 7DB, 7DW, 7DK), VENTO (1H2), GOLF IV Cabriolet (1E7) 1988-1997 1.9 D
1.9 TD
1.9 TDI
2
PASSAT Variant (3A5, 35I) 1988-1997 1.9 TD
1.9 TDI
TRANSPORTER IV Box (70XA) 1990-2003, 1990-2003, 1991-1998, 1991-1998, 1998-2002, 1988-1997, 1993-1998, 1988-1997 2.4 D
TRANSPORTER IV Bus (70XB, 70XC, 7DB, 7DW, 7DK) 1990-2003 2.4 D
VENTO (1H2) 1991-1998 1.8
1.9 TD
1.9 TDI
2, 1.9 TDI, 1.8, 1.9 TD, 2.4 D, 2.4 D, 2, 1.9 TDI, 1.9 TD,GTD, 1.8, 1.9 TD, 2, 1.9 TDI, 1.9 D, 2, 2, 1.9 TD, 1.9 TDI

Part Description:

Idler Pulley, Pulley Assembly Idle, Tensioner Pulley, PULLEY ASSY, IDLE

* New and genuine OEM part.
* Original Packaging
* The same parts are used by the manufacturer in the finished vehicle
* Recommended for installation in official service centers of manufacturer

Compatibility or selection:
If you are not sure about compatibility of a chosen part number or need help with search, please:
* For ground vehicles: let us know the full chassis number or VIN
* For outboard engine: send us a photo of an identification label, located on the engine’s clamp
* For watercraft: send us HIN or identification label

Note:
If you do not have this information, please, send us any available information and we will try to help you.
If you need more items than there are available on sale or cannot find the needed 1 in our listing, please, let us know. We will check the availability and update the information.

Why replace the timing belt with timing components?

Your gas HangZhouage will be dramatically increased when the timing components in your car get checked and serviced at the 60,000-HangZhou interval. A worn-out timing belt can interfere with the functioning of your car’s engine due to improper combustion. With the crankshaft and camshaft adjusted and a new timing belt fitted, the valves of your vehicle will give you great combustion. Getting the timing belt components in your car replaced will cost about a couple of hundred dollars, but damages due to a broken timing belt will cost you your engine. Getting your timing components replaced will give you the comfort of knowing your timing components are working in top-notch condition.
 

Packaging & Delivery

Packaging Details: Carton
Lead Time:

Quantity(Pieces) 1 – 100 >100
Est. Time(days) 15 To be negotiated

Deatail Images

Company Profile
HangZhou CZPT Auto Parts Industry Co., Ltd is a family owned company, established in 2005.
As a real, direct and professional manufacture in China, CZPT has grown to become 1 of greatest manfacturer and exporter in Performance parts, include intake system, exhaust system, cooling system, interior&exterior parts etc.
We own a factory located in HangZhou, HangZhou, which has 8000 square meter, tens of machine, 150 workers, 15 person sales tean, 5 R&D department. Our customers cover North American, South American, Asia, Middle east and Europe. We export the millions of USD per year. Looking forward to have a nice cooperation with you. 
Why Choose YiBai?
It’s simple. The YiBai Company is built on delivering more Quality, Reliability, and Value than any other manufacturer. Whether supplying the world’s automakers with reliable OE parts, or developing aftermarket replacement parts at or above spec, YiBai’s line of products are built to deliver superior all-around performance every day.  
Aftermarket Parts Built At or Above Specification
The quality of YiBai parts is guaranteed because every component that leaves a YiBai factory has been designed with precision, manufactured to the strictest OE standards or above, and subjected to rigorous safety and performance tests. In the end, it all comes down to quality – that’s what the YiBai name stands for.
Measure Everything for a First Time Fit
Our First Time Fit philosophy attracts attention throughout the automotive world, while our commitment to pushing technology into the future and continually sets us apart around the globe.First Time Fit is a promise that YiBai makes to the aftermarket, by providing products that are OE grade or better – and fits the first time.

Our Service
1. OEM Manufacturing welcome: Product, Package… 
2. Sample order 
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of delivery?
A: EXW, FOB CIF, DDU.
Q3. How about your delivery time?
A: Generally, it will take 15 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

 

Three basic types of pulleys, their applications and ideal mechanical advantages

There are 3 basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the 3 basic types, it is time to understand their applications and ideal mechanical advantages.
pulley

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and 1 side of the rope to lift the load. The load is attached to 1 end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is 2 to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are 3 common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you’re not sure which type to choose, you can find more resources online.
pulley

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, 1 can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of 2 pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to 1 end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.
pulley

cost

Replacing a tensioner in a car’s engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car’s engine.

China Good quality Audi Seat VW Belt Tensioner Idler Pulley OE 028145278e, 028 145 278 E     with Best SalesChina Good quality Audi Seat VW Belt Tensioner Idler Pulley OE 028145278e, 028 145 278 E     with Best Sales