Product Description
Product Description
Conveyor pulley can be divided into drive pulley (head pulley) and turn around pulley (tail pulley), drive pulley is the main part for transmitting the power : smooth surface and rubber surface, and rubber surface can be classified into smooth rubber surface, herringbone rubber surface and CZPT rubber surface to meet different technical requirements. Averting pulley can be classified into smooth rubber surface and smooth steel surface.
According to the structure style, the 2 type pulley can be divided into 3 light duty, medium duty and heavy duty.
All the pulley adopt integrated bearing housing which is lubricated and filled with grease and has 2 kinds: iron casting and steel casting, the shaft is made of 45#steel, the shell adopt weld assembly.
Conveyor drive pulley Based on the above design, the pulley is reasonably structured, convenient type selected, performance reliable, long lifespan
Conveyor drive pulley are of stable structure, good performance and long operating life. They can work normally in dusty, wet and muddy environment.
Turning Pulley.
The turning pulley is used for changing the direction of the belt running or increasing the wrap angle between the conveyor belt and the driving pulley .As per different carrying capacities,the bend pulley can be divided into 3 calegories:light duty,medium duty and heavy duty.The pulley which is used for extending the contact surface,is usualy used for below or equal to 45 degree bending.The surface treatment of the bend pulley can be smooth steel surface and flat rubber lagging
Detailed Photos
produce facility
Product Parameters
| drive pulley technical data | |||
| Type | Belt width(mm) | Standard Diameter(mm) | Length(mm) |
| Drive Pulley | 500 | 500 | Length of the pulley depends on the belt width of the conveyor |
| 650 | 500~630 | ||
| 800 | 630~1000 | ||
| 1000 | 800~1150 | ||
| 1200 | 800~1150 | ||
| 1400 | 1000~1350 | ||
| 1600 | 1150~1600 | ||
| 1800 | 1150~1800 | ||
| 2000 | 1350~2000 | ||
| 2200 | 1600~2200 | ||
| 2400 | 1800~2400 | ||
| Bend Pully | 500 | 250~500 | |
| 650 | 250~630 | ||
| 800 | 250~1000 | ||
| 1000 | 250~1600 | ||
| 1200 | 250~1600 | ||
| 1400 | 315~1600 | ||
| 1600 | 400~1600 | ||
| 1800 | 400~1600 | ||
| 2000 | 500~1600 | ||
| 2200 | 630~1600 | ||
| 2400 | 800~1600 | ||
Packaging & Shipping
Company Profile
HangZhou Port Shipbuilding & Machinery Industry Co., Ltd (RPIC) are a comprehensive group enterprise which is engaged in the design, manufacture, installation and maintenance of port bulk-handling equipment. Our company has the Third-level Qualification of Machinery & Electrical Equipment Installation Enterprise and First-Level Qualification of Equipment Maintenance Enterprise. Our company has already passed ISO9002: 2000, ISO14001 and OHSMS18001 system certification.
The business of our company covers the design, manufacture, installation and maintenance of steel structure projects, belt conveyor system projects, port auxiliary equipment, port handling equipment and their accessories. The main products of our company include traveling stackers, running mechanisms of portal cranes, belt conveyors, idler rollers, pulleys, grabs etc.
The products and services of HangZhou Port Machine Engineering Co., Ltd. Spread all over domestic and overseas port industry, electric power industry, metallurgy industry, energy industry, cement industry, food industry, paper industry, etc.
With professional technical teams, exquisite processing equipment, modern management systems and convenient transportation, our company adheres to the business philosophy of “integrity and innovation, working hard to manufacture high quality products and constructe excellent projects, providing customers with value-added services”.
The quality control is carried out throughout the whole production process. We pursue perfection in the design and production of each product. With advanced processing equipment, we are committed to providing superior quality products and services.
RPIC is a leading professional bulk material conveying system equipment supplier. The capacity of conveying equipment can reach 10, 000t/h.
RPIC is a professional equipment installation and maintenance service provider which has the First-level Qualification of the Equipment Maintenance Enterprise.
Our products are well sold to Europe, Australia, America, Asia and African.
We welcome all companies to contact us for business negotiation
Our Advantages
Advantage of Drive Pulley
* Drive pulley is the main component of the belt conveyor transmission power, its way to drive the belt conveyor is with single pulley, double-pulley and multi-pulley.
* Pulley operation is stable, with reliable quality, maintenance-free.
* The design of pulley should fully consider the force condition at all points.
* Pulley structure should be in accordance with the force to use different structural design and manufacturing.
Advantage of Bend Pulley
* Bend pulley is mainly used to change the direction of the conveyor belt or to press the conveyor belt to increase the angle with the drive pulley.
* Bend pulley is equipped with a compact structure, light weight, low occupancy, reliable performance, beautiful appearance with safe and convenient use.
* It can still work properly in large dust, wet mud and other harsh conditions.
successful cases
our certification
FAQ
1.Q: Your bearing type and brand usually use?
A: Large clearance C3 ZZ type deep ball bearing with LYC, NSK, SKF,FAG etc. According to customer’s requirements.
2.Q: How is your Payment Term?
A: T/T or L/C. Another payment term we can also discuss.
3.Q: Can you customize it?
A: We support customization according to your request.
4.Q: What’s the MOQ?
A: 1 piece.
5.Q: What’s the production capacity of your pulley and belt conveyor?
A: pulley 1,000 pcs/year.
6.Q: What’s your pulley’s lifespan?
A: Our pulleys have a long lifespan with good performance and usually make sure 30000 to 50000 hours under the normal site and operation.
Types of pulleys and their advantages and disadvantages
There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
Basic equations of pulley systems
A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
Types of pulleys
There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.
application
What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
shortcoming
Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.
